Fire Alarm Control Panel

These control panels are designed to be used in small & medium commercial industries, buildings, hotels, schools, etc. and are compatible with all type of conventional detectors, manual call points and normally open dry contact devices. Unlike usual conventional range of panels this series comes with a bigger LCD display and a RTC clock for event log

Features

• 4/8 Class B initiating device circuit (IDC).
• All zones accept smoke detectors and any normally open contact device.
• Any Zone can be configured as Alarm or supervisory Zone.
• 2 Class B Notification Appliance Circuits (NAC).
• Fully complies with UL -864 and NFPA-72.
• Rugged CRCA sheet with powder coated finish.
• Operates on 220v 50Hz, AC Mains power supply
• Standby (battery) backup 24v DC power supply with built in charger.
• Error free Fire / Fault status in unambiguous colored LED indication.
• Main, Standby status audible and visual indication.
• Battery Low visual warning with audible tone.
• Form-C relays for fire, fault and supervisory
• Zone Isolation facility with loop voltage cut off.
• Ground fault annunciation facility at 0 ohms.
• All field wiring circuits are Power limited except 220v A.C. and Battery.
• All field wiring circuits are supervised.
• AC Low voltage cutoff.
• Programmable NAC's.
• Programmable IDC’s.
• Programmable AC loss delay
• Alarm verification facility.
• Programmable Trouble reminder facility
• Events history with RTC.